Tel:
01384 414001

Threaded Bar

Perry Threaded Bar is known for it's quality. With a full variety of materials, sizes, finshes and threads you would think it would stop there but it doesn't! Our manufacturing facility produces cut lengths and specials including Tie Bars, Angle Cuts and Chisel Points,,,all made to order in small and bulk quantities. If you need these you will need to call 01384 414001.

 

Sub Categories

Threaded Bar

Perry Threaded Bar is known for it's quality. With a full variety of materials, sizes, finshes and threads you would think it would stop there but it doesn't! Our manufacturing facility produces cut lengths and specials including Tie Bars, Angle Cuts and Chisel Points,,,all made to order in small and bulk quantities. If you need these you will need to call 01384 414001.
No.1752 Chemical Anchor System Resin
This is a highly effective method of securing Threaded Rod Anchor Studs into concrete, with extra nozzles available, enabling the re-use of an unspent cartridge in the future.
1752
No.1753 Chemical Resin Anchor Capsule
The glass capsule is placed in a pre-drilled, cleaned out hole, in accordance with enclosed instructions, and is crushed with the anchor stud causing a chemical reaction between the constituent chemicals enclosed with the capsule.
1753
No.2701M Threaded Bar Metric Grade 4.8 Mild Steel x 1m
Please note that it is not possible to Galvanise under M6.
2701
No.2702M Threaded Bar Metric Grade 4.8 Mild Steel x 2m
Please note that it is not possible to Galvanise under M6.
2702
No.2703M Threaded Bar Metric Grade 4.8 Mild Steel x 3m
Please note that it is not possible to Galvanise under M6.
2703
No.2711W Threaded Bar Whitworth (BSW) Grade 4.8 Mild Steel x 1ft
Please note that it is only possible to Galvanise from ½" thread to 1½" thread (Whitworth and UNC only).
2711
No.2713W Threaded Bar Whitworth (BSW) Grade 4.8 Mild Steel x 3ft
Please note that it is only possible to Galvanise from ½" thread to 1½" thread (Whitworth and UNC only).
2713